PRODUCTS

Add on Card

2 Serial and 1 Parallel Port PCI Adapter

ENLPC-2S1P

SPECIFICATION
Overview

Encore's ENLPC-2S1P is a PCI based dual-channel high performance UART with EPP/ECP enhanced bi-directional parallel controller. It is compatible with 16C550.
UART supports semi duplex receive and transmit conversion automatic and IrDA infrared encode and decode, supporting communication baud rate up to 115200bps,
used for RS232 serial expansion, PCI high-speed serial with automatic hardware speed control, serial networking, RS485 communication, parallel interface/printer port expansion etc.
 
Feature
  • Connect Up to 3 Devices at the Same Time
  • Ideal for Printers, Scanners, Barcode Readers, and More
  • Upgrade Your Desktop Computer through PCI Slot
  • Can be configured as dual channel UART and parallel / printer port bus on PCI
  • Providing two wire serial host interface, hang serial EEPROM similar with 24C0X to store data which is not easy missing
  • Appointing Vendor ID, Device ID, Class Code and other information of PCI board in EEPROM
  • Drive supports Windows 2000 / XP / Vista / 7 and Linux
  • 3.3V or 5V voltage supports serial low power sleep mode
 Serial interface
  • Dual independence UART, compatible with 16C450, 16C550 and 16C552 with enhanced
  • Supporting 5, 6, 7, or 8 data bits and 1 or 2 stop bits
  • Odd, Even, No parity, space 0 and mark 1 etc
  • Programmable Baud Rate is supported with 115200bps
  • 16-byte FIFO buffer supports 4 FIFO trigger layers
  • Supporting MODEM signals CTS, DSR, RI, DCD, DTR, RTS, convert to RS232 level via 75232
  • Supporting CTS, RTS to realize auto handshake and auto transmit speed control, compatible with TL16C550C
  • Supporting serial frame error check and Break circuit interval check
  • Supporting full duplex and semi-duplex serial communication, providing RTS transmit status signal to support RS485 receive and transmit automatic conversion
  • SIR infrared encode and decode, supporting 2400bps to 115200bps baud rate of IrDA communication
 Parallel interface
  • Supporting such as SPP, Nibble, Byte, PS/2, EPP and ECP etc IEEE1284 parallel / printer port modes
  • Supporting bi-directional data transfer, the transfer speed is up to 2M Byte/S
  • With pull-up resistor which is needed by printer port, the peripheral circuit is easy
Specification
  • PCI to Parallel Port / Serial Port Adapter Ports
  • 2 x 9 pins serial connectors
  • 1 x 25 pins parallel connector
Data Transfer Rate:
  • Serial: up to 115200bps baud rate
  • Parallel: up to 2MBps bi-directional rate
Supported OS:
  • Windows 2000, Windows XP 32/64 bit, Windows Vista 32/64 bit, Windows 7 32/64 bit, and Linux
Dimensions:
  • 120 x 18 x 52 mm (W x H x D)
Package Contents
  • 1 x ENLPC-2S1P Adapter
  • 1 x Driver CD
  • 1 x User Manual